Please ensure Javascript is enabled for purposes of website accessibility

SmartPro SMART5000RT3U, 5000 VA/4000 W, Sine Wave, 6U Rackmount/Tower UPS

Quantity:
  • SKU: 47428
  • Manufacturer: TRIPP LITE
  • MPN: SMART5000RT3U
  • Availability: TEMPORARILY OUT OF STOCK
Starting At
$4,232.67
Quantity:
SmartPro SMART5000RT3U, 5000 VA/4000 W, Sine Wave, 6U Rackmount/Tower UPS

Tripp Lite's line-interactive SMART5000RT3U UPS System protects server, networking or telecommunications equipment from blackouts, voltage fluctuations and surges in a compact tower/rackmount housing. In rack configuration, the power module and battery pack occupy only 3 rack spaces (3U) each. Large capacity 5000VA/4000W power module converts raw 208V AC input to fully regulated dual output 208/120 voltage for simultaneous protection of both high- and low-voltage equipment loads. True sine wave output at all times offers guaranteed compatibility with all equipment types. Includes 14 outlets, 8 of which can be individually reset via software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime for more critical equipment. Battery support can be extended indefinitely with additional external 3U rackmount battery packs. Includes slot for internal SNMP/web card, plus two DB9 and two USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data.

  • Large 5000VA/4000W output capacity with full-time sine wave output offers guaranteed compatibility with all equipment types
  • High power density 5kVA power module and battery pack occupy only 3 rack spaces (3U) each (UPS and battery pack require 6U total installed)
  • 38 min. half load runtime, expandable with multiple external battery packs (part# BP48V60RT3U)
  • Line-interactive voltage regulation corrects severe brownouts and overvoltages without using battery power
  • Dual voltage output is simultaneously compatible with both 208V and 120V equipment
  • 14 total outlets (120V: 10 x 5-15R, 2 x 5-20R/208V: 1 x L6-30R, 1 x L14-30R)
  • Diagnostic LEDs provide visual indication of 17 separate performance conditions
  • Included PowerAlert Software provides e-mail notification of power problems and simultaneous automatic unattended shutdown of multiple servers
  • 4 built-in communications ports (2 x DB9, 2 x USB) for remote monitoring and unattended shutdown
  • Slot for SNMP/web card SNMPWEBCARD and environmental sensor ENVIROSENSE for remote communications in large IP environments
  • 8 customized load management receptacles can be individually powered off and back on again via software interface to reboot remote equipment or perform "load shedding" of less critical loads to extend battery runtime for the most critical equipment
  • Emergency Power Off (EPO) interface for emergency shutoff in large facilities
  • Hot-swappable/user replaceable batteries allow on-site battery replacement through the front panel without powering off connected equipment or removing the UPS from the rack
  • UPS battery set ships fully assembled and ready for connection to the power module, no time consuming, connection of individual internal batteries by user is necessary
  • $250,000 Ultimate Lifetime Insurance (USA & Canada Only). No warranty cards required for coverage!
  • NAFTA compliant
  • 2-year manufacturer's product warranty
OUTPUT
Output Volt Amp Capacity (VA) 5000
Output kVA capacity (kVA) 5
Output Watt Capacity (watts) 4000
Output kW capacity 4
Output power factor 0.8
Nominal Output Voltage(s) Supported 120v; 208v
Frequency compatibility 60 Hz
Output voltage regulation (line mode) 208 & 120V (-10%, +20%)
Output voltage regulation (Battery mode) +/- 5%
Built-in UPS output receptacles 10 5-15R outlet(s); 2 5-15/20R outlet(s); 1 L14-30R outlet(s); 1 L6-30R outlet(s)
Built-in controllable switched load banks Eight switchable single-outlet 5-15R load banks
Output circuit breaker 15A branch rated (x3) - 2 breakers support 5 5-15R outlets each, one breaker supports 2 5-20R outlets, L6-30R and L14-30R outlets are unbreakered
Basic PDU options PDU1220 (1U / 13 5-15/20R outlets); PDU1230 (1U / 2 C19, 16 C13 outlets); PDUV20 (0U / 12 5-15/20R outlets); PDU40TDUAL (0U / 40 5-15/20R outlets); PDUV30HV (0U / 6 C19, 32 C13 outlets)
Metered PDU options PDUMH20 (1U / 13 5-15/20R outlets); PDUMH20AT (1U / 16 5-15/20R outlets)*; PDUMV20 (0U / 16 5-15/20R outlets); PDUMV40 (0U / 32 5-15/20R outlets); PDUMV30HV (0U / 6 C19, 24 C13 outlets)
Switched PDU options PDUMH20ATNET (1U / 16 5-15/20R outlets)*; PDUMH30HVNET (2U / 16 C13 outlets); PDUMV20NET (0U / 24 5-15/20R outlets); PDUMV30HVNET (0U / 4 C19, 24 C13 outlets)
External PDU redundancy options *Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS models only
Output AC waveform (AC mode) Sine wave
Output AC waveform (battery mode) Sine wave
INPUT
Nominal input voltage(s) supported 208V AC
UPS input connection type L6-30P
Input circuit breaker 30A double-pole
UPS Input cord length (ft.) 10
UPS Input cord length (m) 3
Recommended Electrical Service 30A 208V
Input cord length (ft.) 10
Input cord length (m) 3
BATTERY
Full load runtime (minutes) 16 min. (4000w)
Half load runtime (minutes) 38 min. (2000w)
Expandable battery runtime Extended runtime supported via optional external battery packs
External battery pack compatibility BP48V60RT3U (multi-pack compatible)
DC system voltage 48V DC
Battery recharge rate (included batteries) Less than 4 hours from 10% to 90%
Battery replacement description Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 282
Overvoltage correction Input voltages between 240V and 282 are reduced by 12%
Undervoltage correction Input voltages between 180V and 199 are boosted by 12%
Severe undervoltage correction Input voltages between 151V and 179 are boosted by 24%
LEDS ALARMS & SWITCHES
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating 1020
UPS AC suppression response time Instantaneous
EMI / RFI AC noise suppression Yes
AC suppression joule rating 1020
AC suppression response time Instantaneous
PHYSICAL
Installation form factors supported with included accessories 4 post 19 inch rackmount (mounting rail kit included); 2 post rackmount (use 2POSTRMKITWM); Tower (use 2-9USTAND)
Installation form factors supported with optional accessories 2 post rackmount (use 2POSTRMKITWM); Tower (use 2-9USTAND)
Optional mounting accessory notes 2 sets of 2POSTRMKITWM required for 2 post rackmount installation of separate power module and battery pack
Primary form factor Rackmount
UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 5.2 x 17.5 x 22.5
UPS / Power Module dimensions in primary form factor (height x width x depth / cm) 13.3 x 44.4 x 57.2
Installed whole system maximum rack depth (inches) 22.8
Installed whole system maximum rack depth (cm) 57.8
Installed whole system total rack space height (rack spaces) 6U
Secondary form factor Tower (requires 2-9USTAND)
UPS / Power Module weight (kg) 0
UPS dimensions details Includes 3U power module and 3U external battery pack
Included battery pack dimensions (height x width x depth / inches) 5.2 x 17.5 x 22.8
Included battery pack dimensions (height x width x depth / cm) 13.3 x 44.4 x 57.8
Included battery pack weight (lbs) 135
Included battery pack weight (kg) 61.3
UPS Shipping dimensions (height x width x depth / cm) 22.8 x 23 x 31.5
Shipping weight (lbs) 320
Shipping weight (kg) 145.3
UPS housing material Steel
Cooling method Fans
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full load) 868.1
Battery mode BTU / hr. (full load) 1511.1
COMMUNICATIONS
Communications interface USB; DB9 Serial; Contact closure
Network monitoring port description Supports detailed monitoring of UPS and site power conditions; 2 USB ports, 1 DB9 serial and 1 DB9 contact closure port (4 total)
PowerAlert software Included
Communications cable USB and DB9 cabling included
WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time 2-4 milliseconds
Low voltage transfer to battery power (setpoint) 151
High voltage transfer to battery power (setpoint) 282
SPECIAL FEATURES
Grounding lug Back panel grounding lug
Cold Start (startup in battery mode during a power failure) Cold-start operation supported
High availability UPS features Hot swappable batteries
Green & high efficiency features Individually controllable load banks; Line interactive UPS with severe brownout and overvoltage correction
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI); ROHS (Reduction of Hazardous Substances)
WARRANTY & INSURANCE
Standard warranty period 2 years
Connected equipment insurance (USA, Canada, Puerto Rico) $250,000 connected equipment insurance

Package Includes:

  • SMART5000RT3U UPS System
  • BP48V60RT3U battery pack
  • PowerAlert Software and cabling
  • Mounting hardware
  • Instruction manual with warranty information