Product SKUs |
MBD-H11DSi-NT-B |
|
MBD-H11DSi-NT-O |
|
Physical Stats |
Form Factor |
|
Dimensions |
- 12" x 13.05" (30.5cm x 33.1cm)
|
Processor/Chipset |
CPU |
- Dual AMD EPYC™ 7001/7002 series Processors
- Socket SP3
|
Chipset |
|
System Memory |
Memory Capacity |
- 16 DIMM sockets
- Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
- 8-channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Memory Type |
- DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 8GB, 16GB, 32GB, 64GB, 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On-Board Devices |
SATA |
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2500 BMC
|
Network Controllers |
- Intel® X550 10G Base-T Ethernet Controller
- 1 Realtek RTL8211E PHY (dedicated IPMI)
|
VGA |
|
Input / Output |
SATA |
|
NVMe |
- 2 Internal NVMe Ports (PCI-E 3.0 x4)
|
LAN |
- 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 2 USB 3.0 ports (rear)
- 4 USB 2.0 ports (2 rear + 2 via header)
|
VGA |
|
Others |
- 1 COM port (rear)
- 2 SATA DOM power connectors
- 1 TPM 2.0 header
|
Expansion Slots |
PCI-Express |
- 3 PCI-E 3.0 x8
- 2 PCI-E 3.0 x16
|
M.2 |
- Interface: PCI-E 3.0 x2
- Form Factor: 22110
- Support SATA devices
|
Chassis ( Optimized for H11DSi-NT ) |
4U Chassis |
|
Server(s) ( with H11DSI-NT ) |
Model(s) |
|
System BIOS |
BIOS Type |
- AMI 128Mb SPI Flash EEPROM
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 5.1
- USB Keyboard Support
- SMBIOS 3.1.1
|
Management |
Software |
- Super Doctor 5
- Watch Dog
- NMI
- SPM
- SUM
- IPMI 2.0, KVM with dedicated LAN
|
Power Configurations |
- ACPI Power Management
- Power-on mode control for AC power loss recovery
|
PC Health Monitoring |
CPU |
- Monitors CPU Core Voltages, +1.1V, +1.5V, +1.8V, +12V, +5V, +5V standby
- CPU switching voltage regulator
|
FAN |
- Up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Dual Cooling Zone
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I2C Temperature Sensing Logic
|
LED |
- CPU / System Overheat LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
- UID
|
Operating Environment / Compliance |
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|