QNAP QXP-W6-AX200. The QXP-W6-AX200 is a PCIe Gen 2x1 Wi-Fi 6 wireless adapter with an Intel® Wi-Fi 6 AX200 module that supports the IEEE 802.11ax standard (backwards compatible with 802.11a/b/g/n/ac), MIMO 2Tx2R, MU-MIMO TX/RX and Bluetooth 5.0. The QXP-W6-AX200 can be installed in a QNAP NAS, or Windows®/Linux® PC to provide fast Wi-Fi 6 connection speeds. The QXP-W6-AX200 can also be used with Wi-Fi 6 router to deploy Wi-Fi 6 network environment. A full-height bracket is pre-installed on the QXP-W6-AX200 and two low-profile brackets are also included.
|Wi-Fi 6 PCIe card|
|Controller IC||Intel AX200 wireless module|
|PCIe interface||PCIe Gen2 x1|
|Theoretical maximum performance||2.4Gbps (5GHz)|
|Antenna||2T x 2R|
|Supported operating systems||QTS 4.4.3 or later; 64-bit Windows 10® PC (download and install driver from Intel website); Linux kernel 5.1 or later (download and install driver from Intel website)|
|Hardware requirement||NAS or PC with a PCIe slot, 64-bit processor and operating system.|
|Package contents||1 x QXP-W6-AX200 card (GC-WBAX200 QNAP edition, a full-height bracket is pre-installed); 1 x installation guide; 2 x half-height low-profile brackets (a standard bracket and a flat bracket for NAS); Windows 10® driver CD.|
|Operating temperature||0°C ~ 40°C (32°F ~ 104°F)|
|NAS Software Spec||
? Supports QTS 4.4.3 or later
? Security Protocol: No Auth / WEP / WPA-Personal / WPA2-Personal
? Supports the Captive Portal authentication method: Access WiFi via the configuration by Qfinder utility / Browser Station.