ServView V Widescreen with 8-Port KVM Switch, DVI-D, USB
- This dual-rail console drawer features keyboard, touch pad, and widescreen LCD monitor in 1U.
- The flip-open 17", widescreen LCD panel supports resolutions up to 1920 x 1080 (1920 x 1200 scaled).
- Front-panel control and LED indicator make it easy to adjust display image.
- Provides a USB port on the front panel.
The ServView™ V Widescreen with 8-Port DVI-D KVM Switch with USB offers server management in a space-saving, streamlined package. The tray includes a keyboard, touch pad, a 17" TFT widescreen LCD panel, and an integrated 8-port KVM switching module housed in an industry-standard 19" 1U rack drawer, saving you valuable cabinet space. Front panel KVM switch selection buttons enable switching between servers with only the LCD panel open.
The dual-rail design enables the keyboard and LCD display to slide in and out of the rack independently. Store the keyboard out of the way while keeping the display open so you can easily monitor your servers. Check system status even with the cabinet door closed.
Control made easy
Save space by using the switching controls on the monitor bezel to control the switching module without pulling open the keyboard drawer. The top of the drawer has an LED lighting bar to make the closed drawer easy to find in a dark rack.
You can install a USB RF or Bluetooth® adapter in the hide-away at the top of the keyboard/mouse tray to access the ServView V and servers with your own wireless keyboard.
The sturdy, slim drawer helps reduce server room clutter. Pull it out and latch it securely in place to use. Or fold your display into the drawer, slide it into the rack, and lock it in place. The ServView V also includes a scratch-resistant surface and a slip-free handle. Installation is easy, too.
Easy to see
The LCD supports a maximum resolution of 1920 x 1080 at 60 Hz. On-screen menus provide quick access to adjust brightness, contrast, screen resolution, and refresh rates.
Support for VESA DDC 1/2B enables the monitor to automatically adjust to its optimum performance when connected to a server that supports DDC.
Easy to use
The drawer console features a full 105-key, low-profile keyboard. It also supports Sun and Mac® keyboard mapping. The touch pad has simulated wheel control and is dust- and water-resistant. At a 45-degree or greater angle, the LCD monitor automatically shuts down, so you don't have to worry about leaving it on when you fold it and put it away. Additionally, Sun® native resolutions are supported for multiplatform functionality.
Rack it up
The ServView V KVM tray installs in 4-post racks or cabinets with a rail depth of 23.7" minimum to 45.3" maximum. A rackmount kit is included.
Active Display Area — 14.5" x 9" (36.7 x 22.9 cm) squared
Adjustments — On-screen display (KVM Tray only)
Colors — 16.2 million
Connectors — Tray: (1) Centronics® 36 M for rear module connection;
(2) USB Type A F, (1) on front and (1) in compartment above keyboard for Composite wireless K/M;
KVM Module: Computer: (1) Centronics 36 F to interface with KVM tray;
(8) DVI-D inputs;
(8) USB Type B F;
(1) IEC320 M, C14
Contrast Ratio — 500:1
Display — 17" TFT widescreen LCD
Resolution (Maximum) — 1920 x 1080 (1920 x 1200 scaled)
CE Approval — Yes
Power — 100–240-VAC universal switching power with 12-VDC, 4-A output
Size — 1.7"H x 17"W x 23.7"D (4.4 x 43.2 x 60.2 cm)
- ServView V Widescreen KVM Tray
- KVM switch module
- Power supply
- Power cord
- Universal rear mounting kit
- (10) 0.9" x 0.43" screws
- (10) 0.12" x 0.24" screws
- User's manual