Product SKUs |
MBD-X11SCH-F |
|
Physical Stats |
Form Factor |
|
Dimensions |
- 9.6" x 9.6" (24.38cm x 24.38cm)
|
Processor/Cache |
CPU |
- 8th/9th Generation Intel® Core?i3/Pentium®/Celeron® Processor, Intel® Xeon® E-2100 Processor, Intel® Xeon® E-2200 Processor.
- Single Socket LGA-1151 (Socket H4) supported, CPU TDP support Up to 95W TDP
|
Cores / Cache |
|
Note |
- BIOS version 1.0b or above is required to support Intel® Xeon® E-2200 and 9th Generation Intel® Core? i3/Pentium®/Celeron® Processors
|
System Memory |
Memory Capacity |
- Up to 128GB DDR4 ECC UDIMM, DDR4-2666MHz, in 4 DIMM slots
|
Memory Type |
- 2666/2400/2133MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
On-Board Devices |
Chipset |
|
SATA |
- Intel® C246 controller for 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10
|
IPMI |
|
Network Controllers |
- Dual LAN with Intel® Ethernet Controller I210
|
Graphics |
|
Input / Output |
USB |
- 6x USB 2.0 ports (2 rear, 4 via headers); 2x USB 3.1 Gen2 ports (rear); 3x USB 3.1 Gen1 ports (1 Type-A, 2 via header)
|
Video Output |
|
Serial Port / Header |
- 2 COM Ports (1 rear, 1 header)
|
TPM |
|
Expansion Slots |
PCI-E |
- 1 PCI-E 3.0 x8 (in x16 slot),
- 1 PCI-E 3.0 x8
|
M.2 |
- M.2 Interface: PCI-E 3.0 x4
- Form Factor: 2280, 22110
- Key: M-Key
- Double Height Connector
|
System BIOS |
BIOS Type |
|
BIOS Features |
- ACPI 6.0
- SMBIOS 2.7
- Plug and Play (PnP)
- RTC (Real Time Clock) Wakeup
- UEFI 2.7
- USB Keyboard support
- PCI 3.0
|
Management |
Software |
- Intel® Node Manager, IPMI2.0, NMI, SPM, SSM, SUM, SuperDoctor® 5, Watchdog
|
Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
PC Health Monitoring |
Voltage |
- +12V, +3.3V, +5V, +5V standby, 6 -fan status, Chassis intrusion header, Chipset Voltage, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, VBAT
|
FAN |
- 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Fan speed control, Overheat LED indication, Thermal control tachometer fan connectors
|
Temperature |
|
LED |
- CPU / System Overheat LED, UID/Remote UID
|
Other Features |
-
ACPI power management, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, M.2 NGFF
connector, Node Manager Support, UID, WOL
|
Operating Environment |
Operating Temperature Range |
- 0°C ~ 50°C (32°F ~ 122°F)
|
Non-Operating Temperature Range |
- -40°C - 70°C (-40°F - 158°F)
|
Operating Relative Humidity Range |
- 8% - 90% (non-condensing)
|
Non-Operating Relative Humidity Range |
- 5% - 95% (non-condensing)
|