16GB KSM29ES8/16ME Single-Rank, DDR4 2933MHz, CL21, ECC Unbuffered DIMM Memory
Kingston's KSM29ES8/16ME is a 2G x 72-bit (16GB) DDR4-2933 CL21 SDRAM (Synchronous DRAM), 1Rx8, ECC, memory module, based on nine 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2933 timing of 21-21-21 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
-
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals - Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- Temperature sensor with integrated SPD
- 16 internal banks; 4 groups of 4 banks each
-
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS) - Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23” (31.25mm)
- RoHS Compliant and Halogen-Free
Brand | Kingston |
Model | KSM29ES8/16ME |
Capacity | 16GB |
Form Factor | DIMM |
Type | 288-Pin DDR4 SDRAM |
Speed | DDR4 2933 |
CAS Latency | 21 |
Timing | 21-21-21 |
Voltage | 1.2V |
ECC | Yes |
Buffered/Registered | Registered |
Rank | 1Rx8 |
Heat Spreader | No |