Black Friday, but early!

1TB Rocket 4 Plus, 7000 / 5300 MB/s, TLC NAND, PCIe NVMe 4.0 x4, M.2 2280 SSD

Quantity:
  • SKU: 13772093
  • Manufacturer: SABRENT
  • MPN: SB-RKT4P-1TB
  • Availability: USUALLY SHIPS WITHIN 1-3 WEEKS
Starting At
$98.38
Quantity:
1TB Rocket 4 Plus, 7000 / 5300 MB/s, TLC NAND, PCIe NVMe 4.0 x4, M.2 2280 SSD

The Sabrent 1TB Rocket 4 PLUS NVMe 4.0 Gen4 PCIe M.2 Internal SSD Extreme Performance Solid State Drive (SB-RKT4P-1TB) delivers all the advantages of flash disk technology with PCIe Gen4.0 x4 interface.

Based on TLC NAND Flash memory, its performance speeds can reach up to 7000 MB/s (read) and 5300 MB/s (write) when using a PCIe Gen4 motherboard. Using a PCIe Gen3 Motherboard Speeds will reach up to 3400 MB/s (read) and 3000 MB/s (write). Power consumption is much lower than traditional hard drives, making it the best embedded solution for new systems.

The Sabrent 1TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 Internal SSD was designed using PCIe 4.0 which allows for speeds of up to 7000 MB/s (read) and 5300 MB/s (write), significantly faster than PCIe 3.0.

Note: In order to take advantage of these speeds, a PCIe Gen4 motherboard is REQUIRED. Otherwise it will be at pcie gen 3 speed at max of 3500MB/s.
When installing any NVMe PCIe 4.0 SSD directly onto a PCIe Gen4 Motherboard a Heatsink is required to dissipate the heat generated by the drives extreme speed levels to avoid thermal throttling and maximize performance.

The Sabrent 1TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 Internal SSD is backward compatible with PCIe 3.0. Using a Gen 3 PCIe motherboard will enable the user to reach speeds of up to 3400 MB/s (read) and 3000 MB/s (write).

  • NVMe M.2 PCIe Gen4 x4 Interface
  • PCIe 4.0 Compliant / NVMe 1.3 Compliant
  • Power Management Support for APST / ASPM / L1.2
  • Supports SMART and TRIM commands
  • Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface
  • Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision
  • Upgradeable Firmware.
Model # SB-RKT4P-1TB
Capacity 1000GB
NAND B27
Controller E18
Interface PCIe Gen4 x 4
Certifications CE,FCC,VCCI,BSMI,RoHS
Max Sequential Read 7000 (MB/s)
Max Sequential Write 5300 (MB/s)
Random 4K QD32(IOPS) Read 350K
Random 4K QD32(IOPS) Write 700K
Power Consumption R/W R 6.3/W 6.6 (W)
Power Supply 3.3V
Form Factor M.2 2280
Height 2.25mm
Width 22mm
Lenght 80mm
Operating Temperature 0~70°C
Storage Temperature -40~85°C
MTBF 1600000
Shock Resistant 1500G
Data Correction LDPC
Warranty 5 year with registration
TBW 700