| Technical Specifications |
SAS Expansion
Direct Attached Storage (DAS)
JBOD Enclosure
RAID Enclosure
|
- Case can be used without motherboard, CPU, RAM, etc. as a Direct Attached Storage(DAS) system.
- SAS Expansion / DAS Mode requires use of:
- One(1) or Two(2) SFF-8087 to SFF-8088 or SFF-8643 to SFF-8644 Bracket Adapters
- These SAS Bracket Adapters screw into the case PCIe slots.
- External SFF Connector must be matched or adapted to your Host HBA/RAID cards SFF adapter
- Each SAS Bracket Adapter requires Two(2) SFF to SATA fan out cables (respective of the SFF type of your adapter)
- ORICO Converter Mounting Bracket Amazon Affiliate Link
- One(1) SFF-8643 Host to 4x SATA Cable per SFF-8643 port
- One(1) SFF-8087 Host to 4x SATA Cable per SFF-8087 port
- An equivalent 24pin PSU power-on jumper to power on the SFX PSU for HDD power
- Optimal airflow requires an equivalent IO Shield Blank Filler
- This configuration may also be referred to as a JBOD Expansion Enclosure or RAID Enclosure
|
| Motherboard |
- Mini-ITX (170mm × 170 mm) [6.7" × 6.7"]
- NOTE: Motherboard mounting tray can be slid out of case to simplify assembly and maintenance
|
| CPU Air Coolers |
- Up to 110mm tall
- RECOMMENDED CPU COOLERS: Noctua D9L, Thermalright SI-100, Thermalright Silver Soul 110, or ID-COOLING IS-67-XT
|
| CPU Liquid Coolers |
- One(1) 92mm liquid cooler (Asetek 645LT) with 120mm to 92mm adapter
- 92mm AIO to 120mm fan adapter is a 3D printed part
|
| Dust Filter |
- Includes one(1) washable / reusable dust filter
- 30ppi open cell reticulated polyether filter foam with flame resistant rating, UL94 HF1, UL FILE NO E93229(N)
- Alternate density and/or materials such as aluminum mesh available for OEM projects
|
| Fan Mounting |
- Rear
- One(1) 120mm fan, up to 38mm thick
- Side
- Single Slot PCIe Card: One(1) 120mm x 25mm fan
- Dual-Slot PCIe Card: 15mm thick fan recommended
- Fan brackets are baffled from venting to reduce noise levels and improve airflow
-
RECOMMENDED 120mm FANS: Noctua A12x25 PWM or Noctua A12x25 Chromax Black, Arctic P12 MAX, Phanteks T30,Corsair RS120 MAX, Lian Li UNI Fan P28, Lian Li UNI Fan SL-Infinity, or any
fan from Dynatron.
|
| GPU / PCIe Cards |
- Two(2) full height PCIe card slot cutouts
- Maximum card height: 115mm - including power connectors
- ENSURE CLEARANCE FOR 12-pin 12VHPWR / CEM5 POWER CONNECTOR
- Maximum card length: 185mm
- If using a dual slot PCIe card, such as a GPU, you must use a slim (15mm thick) 120mm fan on the side vent
|
| Storage |
- Ten(10) 3.5" SAS or SATA Hard Drive Disks
- Case includes ten(10) SATA/SAS SFF-8482 male to SATA female adapters (preinstalled in case)
- Four(4) shoulder screws attached to 3.5" HDDs
- These shoulder screws guide HDDs through slots and align the drive to a backplane mounted SATA to SATA adapter
- User must connect SATA data and power cables on inside of case to these SATA to SATA adapters
- Case has a locking mechanism and key, as well as thumb screws, to secure drives
- Case also includes two(2) SATA power distribution cables (One(1) SATA power male to five(5) SATA power female)
- Case does NOT include any data cables
- Hot-swap support can depends on your HBA / RAID card, motherboard, and OS.
- Please note that connecting a SAS drive to a SATA port will operate as SATA.
- A SAS controller can control SATA drives, but a SATA controller cannot control SAS drives.
- Four(4) 2.5" SSD/HDD mounting points (behind power button and USB front panel area)
- Internal Drive Bay Converter Mounting Bracket
- ORICO Converter Mounting Bracket Amazon Affiliate Link
|
| Front Panel I/O |
- One(1) USB 3.2 Type C 10Gbps Port
- Two(2) USB 3.0 Type A Ports
- One(1) 16mm Momentary Power Button with integrated Power Status LED (Ring Shape, White)
|
| Power Supply |
- SFX or SFX-L form factor
- RECOMMENDED POWER SUPPLIES: Cooler Master V1100 SFX Platinum 1100W, CORSAIR SF1000 1000W, Seasonic FOCUS SPX-750 750W, FSP Dagger Pro 850W, FSP Dagger Pro 650W, FSP SFX Pro 450W
|
| Rack Rails |
- General Devices C300-S Series
- Rack Rails are not included by default, must be purchased on the configuration or parts page.
- Brand Compatibility
- Brands such as iStarUSA TC Rails are natively compatible.
- Please contact our support team for any compatibility questions.
|
| Warranty |
- Case and Rack Rails
- 5 Year Warranty
- Liquid Coolers & Fans
- 3 Year Warranty
- Please see our warranty policy for additional conditions, exclusions, and limitations.
|
| Rev Control |
- 1.0 (7/25/23 - **/**/**)
- Initial Release
|
| Case Mechanicals |
| Material |
- Chassis
- ASTM-A-653 G30 Zero Spangle 20 Gauge Galvanized Steel
- Front Panels
- ASTM-A-653 G30 Zero Spangle 18 Gauge Galvanized Steel
- Rack Ears
- ASTM-A-653 G30 Zero Spangle 14 Gauge Galvanized Steel
|
| Finish |
- Semi-gloss fine texture powder coat finish
- Powder coat is an outdoor architectural grade polyester epoxy blend
- Compliant with SAE AMS-STD-595 / FED-STD-595 color number 27038 (ANA 514)
- Custom powder coat finishes are available, additional labor/material charges and 10 unit MOQ will apply.
- Unpainted chassis, panels, or parts available on request (for DIY paint jobs)
|
| Branding |
- Case is unbranded on interior and exterior of chassis.
- Optional logo screen printing (full color) on front panel for business customers, MOQ 10 units
|
| Outside Dimensions |
- 15.04" x 17.00" x 3U (5.22") [DxWxH]
- 382mm x 432mm x 132.5mm [DxWxH]
- Depth from front rack post is 14.89" [378mm]
|
| Weights |
- Chassis
- 19.25lbs [8.73kg]
- Rack Slide Kits - All Rail Kits Will Ship In Separate Box
- GDRAIL-14XX - 6lbs [2.72kg]
- GDRAIL-20XX - 7.5lbs [3.4kg]
- GDRAIL-26XX - 8.75lbs [3.97kg]
- Fans
- 1.4lbs [.64kg] total - .7lbs per fan
- Packaging Materials (Box, Tape, Foam Corners)
- 3.25lbs [1.47kg]
|
| Shipping |
- 20.5" x 18.5" x 9.5" (Shipping Box Outside Dimensions)
- 20" x 18" x 9" (ID)
- Shipping box is ECT52, Double Wall, Kraft Brown
- Standard SLIGER branded tape, optional unbranded kraft brown tape for business customers
|
