SmartPro SMART1000RM1U, 1000 VA/800 W, Sine Wave, 1U Rackmount UPS

  • SKU: 1626
  • Manufacturer: TRIPP LITE
  • MPN: SMART1000RM1U
  • Availability: USUALLY SHIPS WITHIN 3-5 DAYS
Starting At
SmartPro SMART1000RM1U, 1000 VA/800 W, Sine Wave, 1U Rackmount UPS

Tripp Lite SMART1000RM1U 1000VA/1kVA/800 watt line interactive, sine wave UPS system offers complete power protection for critical network applications in a highly efficient 1U total rack/tower configuration. Simultaneous-use network management interfaces include USB, RS-232 and optional SNMP/Web accessory card. Line interactive voltage regulation, network-grade surge suppression and long-lasting sine wave AC output during blackouts make this UPS ideal for advanced networking applications in datacenters, computer rooms and network closets.

  • 1kVA/1000VA/800W line interactive 1U rackmount UPS, Sine wave output
  • 120V output, Corrects brownouts and overvoltages from 83V to 147V
  • USB, RS232, EPO and slot for optional SNMP/WEB card
  • Front panel status LEDs with load level and battery capacity display
  • 99% line-mode UPS efficiency, 2 switchable output load banks
  • Protects rackmount servers, networking equipment, telecom systems and more
  • Advanced Automatic Voltage Regulation corrects brownouts and overvoltages without draining battery
Output Volt Amp Capacity (VA) 1000
Output kVA Capacity (kVA) 1
Output Watt Capacity (Watts) 800
Power Factor 0.8
Nominal Output Voltage(s) Supported 110V; 115V; 120V
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line Mode) -21%, +8%
Output Voltage Regulation (Battery Mode) +/- 5%
Output Receptacles (6) 5-15R
Load Management Receptacles Two switchable single-outlet 5-15R load banks
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
Rated input current (Maximum Load) 9.2A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type 5-15P
Input Circuit Breakers 15A
Recommended Electrical Service 15A 120V
Input Cord Length (ft.) 10
Input Phase Single-Phase
Full Load Runtime (min.) 4 min. (800w)
Half Load Runtime (min.) 14 min. (400w)
DC System Voltage (VDC) 24
Battery Recharge Rate (Included Batteries) Less than 4 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery Cartridge RBC69-1U
Battery Access Front panel battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime No
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage Correction Input voltages between 128 and 147 are reduced by 12%
Undervoltage Correction Input voltages between 83 and 107 are boosted by 14%
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
Audible Alarm Audible alarm indicates power-failure, overload and low-battery conditions
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
UPS AC Suppression Joule Rating 450 joules
EMI / RFI AC Noise Suppression Yes
AC Suppression Response Time Instantaneous
Included Mounting Accessory Description Included mounting brackets support 2 and 4 post rackmount installation; Optional 4POSTRAILKIT1U is available for additional support in 4 post rackmount applications
Primary Form Factor Rackmount
UPS Power Module Dimensions (hwd, in.) 1.75 x 17.5 x 16.75
Rack Height (U Spaces) 1
Minimum Required Rack Depth (inches) 19.8
UPS Power Module Weight (lbs.) 32
UPS Shipping Dimensions (hwd / in.) 6.2 x 23.5 x 22.5
Shipping Weight (lbs.) 36
Cooling Method Fan
UPS Housing Material Steel
Minimum Required Rack Depth (mm) 503
Primary UPS Height (mm) 44
Primary UPS Width (mm) 444
Primary UPS Depth (mm) 425
Shipping Height (mm) 157
Shipping Width (mm) 597
Shipping Depth (mm) 572
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 39
Battery Mode BTU / Hr. (Full Load) 816
AC Mode Efficiency Rating (100% Load) 99%
Communications Interface USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software For local monitoring via the UPS’s built-in communications ports, download PowerAlert Local software at
Communications Cable USB and DB9 cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
Transfer Time 5 milliseconds AC to DC; 1 millisecond DC to AC
Low Voltage Transfer to Battery Power (Setpoint) 83
High Voltage Transfer to Battery Power (Setpoint) 147
Grounding Lug Back panel grounding lug
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
High Availability UPS Features Hot swappable batteries
Green Energy-Saving Features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI); ENERGY STAR Qualified
Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration. Note: Registration is requiredfor 3-year warranty.
Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000 Ultimate Lifetime Insurance