Fall in love with these SAVINGS
| Free shipping, 10% off, and more!

32GB ValueRAM DDR4 2666MHz, CL19, SO-DIMM Memory

Quantity:
  • SKU: 13170138
  • Manufacturer: KINGSTON
  • MPN: KVR26S19D8/32
  • Availability: USUALLY SHIPS WITHIN 3-5 DAYS
Starting At
$73.59
Quantity:
32GB ValueRAM DDR4 2666MHz, CL19, SO-DIMM Memory

This document describes ValueRAM's KVR26S19D8/32 is a 4G x 64-bit (32GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers.

  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP = 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Dual-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.18” (30.00mm)
  • RoHS Compliant and Halogen-Free
Model
Storage Temperature -55C to +100C
ECC non-ECC
Model KVR26S19D8/32
Details
Capacity 32GB
Type 260-Pin DDR4 SO-DIMM
Speed DDR4 2666
Cas Latency 19-19-19
Voltage 1.2V
Heat Spreader No